6001 Nachi Bearing Open C3 Japan 12x28x8mm

6001 Nachi Bearing Open C3 Japan 12x28x8mm6001 Nachi Bearing 12mm x 28mm x 8mm Made in Japan 6001 Nachi Bearing, Made in Japan, the 6001 inner diameter is 12mm, the 6001 outer diameter is 28mm, the 6001 width is 8mm. 6001 Nachi Ball Bearing Nachi Deep groove Ball Bearing Radial Clearance: C3 Dimensions: 12mm x 28mm x 8mm Metric ID (inner diameter) Bore: 12mm OD (outer diameter): 28mm Width: 8mm Size: 12 x 28 x 8 mm Quantity: 1 Bearing Dynamic load rating Cr: 5,100 N Static load rating Cor:

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shields and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.